* Ei reaaliaikaiset tiedot.
* Mikään Euroopan unionin jäsenvaltion toimivaltainen viranomainen ei ole hyväksynyt tätä kryptovaran kuvausta. Kryptovaran tarjoaja on yksin vastuussa tämän kryptovaran kuvauksen sisällöstä.
Energiankulutus: 8.74318 kWh/a | Uusiutuva energia: 37.912410119%
Kryptovarojen ESG-sääntelyllä (ympäristö, sosiaalinen vastuu ja hallintotapa) pyritään puuttumaan niiden ympäristövaikutuksiin (esim. energiaintensiivinen louhinta), edistämään läpinäkyvyyttä ja varmistamaan eettiset hallintokäytännöt, jotta kryptoteollisuus saadaan vastaamaan laajempia kestävyys- ja yhteiskunnallisia tavoitteita. Nämä säännökset kannustavat noudattamaan standardeja, jotka vähentävät riskejä ja lisäävät luottamusta digitaalisiin varoihin.
| Nimi | Coinmotion Ltd |
| Oikeushenkilötunnus | 2135881-0 |
| Kryptovaran nimi | Avantis |
| Konsensusmekanismi | Base is a Layer-2 (L2) solution on Ethereum that was introduced by Coinbase and developed using Optimism's OP Stack. L2 transactions do not have their own consensus mechanism and are only validated by the execution clients. The so-called sequencer regularly bundles stacks of L2 transactions and publishes them on the L1 network, i.e. Ethereum. Ethereum's consensus mechanism (Proof-of-stake) thus indirectly secures all L2 transactions as soon as they are written to L1. |
| Kannustinmekanismit ja sovellettavat palkkiot | Base is a Layer-2 (L2) solution on Ethereum that uses optimistic rollups provided by the OP Stack on which it was developed. Transaction on base are bundled by a, so called, sequencer and the result is regularly submitted as an Layer-1 (L1) transactions. This way many L2 transactions get combined into a single L1 transaction. This lowers the average transaction cost per transaction, because many L2 transactions together fund the transaction cost for the single L1 transaction. This creates incentives to use base rather than the L1, i.e. Ethereum, itself. To get crypto-assets in and out of base, a special smart contract on Ethereum is used. Since there is no consensus mechanism on L2 an additional mechanism ensures that only existing funds can be withdrawn from L2. When a user wants to withdraw funds, that user needs to submit a withdrawal request on L1. If this request remains unchallenged for a period of time the funds can be withdrawn. During this time period any other user can submit a fault proof, which will start a dispute resolution process. This process is designed with economic incentives for correct behaviour. |
| Raportointikauden alku | 2025-07-27 |
| Raportointikauden loppu | 2026-07-27 |
| Energiankulutus | 8.74318 (kWh/a) |
| Energiankulutuksen resurssit ja menetelmät | The energy consumption of this asset is aggregated across multiple components: To determine the energy consumption of a token, the energy consumption of the network(s) base is calculated first. For the energy consumption of the token, a fraction of the energy consumption of the network is attributed to the token, which is determined based on the activity of the crypto-asset within the network. When calculating the energy consumption, the Functionally Fungible Group Digital Token Identifier (FFG DTI) is used - if available - to determine all implementations of the asset in scope. The mappings are updated regularly, based on data of the Digital Token Identifier Foundation. The information regarding the hardware used and the number of participants in the network is based on assumptions that are verified with best effort using empirical data. In general, participants are assumed to be largely economically rational. As a precautionary principle, we make assumptions on the conservative side when in doubt, i.e. making higher estimates for the adverse impacts. |
| Uusiutuvan energian kulutus | 37.912410119% |
| Energiaintensiteetti | 0.00000 (kWh) |
| Scope 1 DLT KHK-päästöt - Hallinnoidut | 0.00000 (tCO2e/a) |
| Scope 2 DLT KHK-päästöt - Ostetut | 0.00291 (tCO2e/a) |
| KHK-intensiteetti | 0.00000 (kgCO2e) |
| Keskeiset energialähteet ja menetelmät | To determine the proportion of renewable energy usage, the locations of the nodes are to be determined using public information sites, open-source crawlers and crawlers developed in-house. If no information is available on the geographic distribution of the nodes, reference networks are used which are comparable in terms of their incentivization structure and consensus mechanism. This geo-information is merged with public information from Our World in Data, see citation. The intensity is calculated as the marginal energy cost wrt. one more transaction. Ember (2025); Energy Institute - Statistical Review of World Energy (2024) - with major processing by Our World in Data. “Share of electricity generated by renewables - Ember and Energy Institute” [dataset]. Ember, “Yearly Electricity Data Europe”; Ember, “Yearly Electricity Data”; Energy Institute, “Statistical Review of World Energy” [original data]. Retrieved from https://ourworldindata.org/grapher/share-electricity-renewables. |
| Keskeiset KHK-lähteet ja menetelmät | To determine the GHG Emissions, the locations of the nodes are to be determined using public information sites, open-source crawlers and crawlers developed in-house. If no information is available on the geographic distribution of the nodes, reference networks are used which are comparable in terms of their incentivization structure and consensus mechanism. This geo-information is merged with public information from Our World in Data, see citation. The intensity is calculated as the marginal emission wrt. one more transaction. Ember (2025); Energy Institute - Statistical Review of World Energy (2024) - with major processing by Our World in Data. “Carbon intensity of electricity generation - Ember and Energy Institute” [dataset]. Ember, “Yearly Electricity Data Europe”; Ember, “Yearly Electricity Data”; Energy Institute, “Statistical Review of World Energy” [original data]. Retrieved from https://ourworldindata.org/grapher/carbon-intensity-electricity Licenced under CC BY 4.0. |
Share on
